Hobart ML-134252 Kitchen Utensil User Manual


 
– 2 –
© HOBART CORPORATION 1998, 2004
Installation, Operation and Care of
MODEL 2912B SLICER
SAVE THESE INSTRUCTIONS
GENERAL
The model 2912B slicer is equipped with a
1
/2 HP motor and is available for single-phase electrical
service. The slicer features the exclusive Hobart Clean Cut
TM
contoured stainless steel knife with
super alloy edge. The slicer is furnished with a cord and plug as standard equipment. The heavy, front-
mounted meat grip is standard. The 2912B slicer features automatic slicing with six adjustable speeds.
The Power Interrupt feature, standard, requires the slicer to be manually restarted after a power
interruption.
The Gauge Plate and Carriage Interlock feature, standard, prevents the Carriage Tray from being
removed unless the Carriage is in the H
OME position (pulled all the way to the front) and the Gauge Plate
is closed. Once the Carriage Tray is tilted horizontally or removed, the slicer will not stay on after the
switch is pulled and released. Also, the Gauge Plate cannot be opened until the Carriage Tray is
returned to its normal operating position.
The HomeStart feature, standard, requires the carriage to be in the H
OME position before the slicer can
be started.
The heavy front meat grip provided on all 2912B models has a solid core and stainless steel support
arm to enhance feeding of the product into the knife during slicing. The meat grip's tapered handle
makes it easy to lift or move the meat grip to the retaining clip during product loading.
The model 2912B-2 slicer is equipped with the Roast Beef Package which includes the high carriage
fence, four 1
5
/8" tall rubber feet and a skid plate kit as standard equipment.
A tubular food chute, slaw tray and low carriage fence are other available accessories for model 2912B.
Model 2912B Slicer