Filter
Top Products
– 2 –
Installation, Operation and Care of
MODELS HCK40, HCK42, HCK91, HCK92,
HDK40, HDK42, HDK91 & HDK92
HOBART ELECTRIC FRYERS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
GENERAL
Standard features include stainless steel fry tank and front, a high limit device, twin baskets, and on
Models HCK40, HCK42, HDK40 and HDK42, a lift-out fry tank which is easily removed for cleaning.
HCK40, HCK91, HDK40 and HDK91 floor model fryers are equipped with 6" adjustable legs. They may
be ordered without legs for installation on a masonry base. The fryers also can be supplied with a 4"
toe base in place of legs as an optional extra.
Optional features include extra fry tanks, a large single basket supplied in place of twin baskets, syphon
and strainer bags, casters (floor models only), stainless steel fry tank cover, and extra sets of twin
baskets or single baskets. Stainless steel side(s) and back are also available optionally.
The HCKO and HDKO Frymate Work Stations may be installed next to any of the HCK or HDK Series
Fryers. The top draining section has a lift-out screen and center drain into a 3-quart, slide-out drain
pan. The interior of the cabinet has storage space for 4 standard #200 pans in drawer-type, non-tilt
pan slides. Pans are not supplied with the Frymate.
The Frymate is equipped with 6" adjustable legs. It may be ordered without legs for installation on a
masonry base, or with a 4" toe base in place of legs as an optional extra.
© HOBART CORPORATION, 1995
AUTOMATIC
BASKET MELT
MODEL WIDTH / STYLE CONTROLS LIFT CYCLE
HCK40 20" Floor model Mechanical Opt. Opt.
HCK42 20" Countertop Mechanical Opt. Opt.
HCK91 24" Floor model Mechanical Opt. Opt.
HCK92 24" Countertop Mechanical Opt. Opt.
HDK40 20" Floor model Solid State Opt. Std.
HDK42 20" Countertop Solid State Opt. Std.
HDK91 24" Floor model Solid State Opt. Std.
HDK92 24" Countertop Solid State Opt. Std.
HCKO/HDKO 20" Frymate N/A N/A N/A