Filter
Top Products
– 6 –
CONTROLS — MODELS HDK40/42 and HDK91/92 (Fig's. 3 and 4)
Power Switch — Turns electric power to the fryer on or off.
ON Indicator Light — (Red) Indicates electric power to the fryer is on.
HEAT Indicator Light — (Amber) Indicates heating elements are supplying heat.
High Limit Light — When ON, indicates that the oil temperature is higher than 400°F, or that
the heating elements are not covered with shortening, and the system
has shut down. Call your local Hobart Service Office.
Temperature Controller — Controls temperature of oil in tank. Temperature range is 0-375°F.
Fry/Melt Switch — Position on MELT when solid shortening is being melted; then position
on FRY for normal operation.
Ball Pull Rod — (Models HDK40/42 only.) Raises elements from tank when pulled
straight out. Lowers elements into tank when pushed in.
ADDING LIQUID SHORTENING TO THE FRYER
Shortening should be between 1" and 2" above the top of the heating elements' surface.
Liquid shortening may be used in all fryers.
PL-40538-1
Fry/Melt
Switch
Heat Indicator
Light
High Limit Light
Temperature Controller
On Indicator Light
Power Switch
HDK91/92
Fig. 4
PL-40537-1
Ball Pull Rod
Fry/Melt
Switch
Heat Indicator
Light
Power Switch
High Limit Light
Temperature Controller
On Indicator Light
HDK40/42
Fig. 3