Filter
Top Products
– 2 –
Installation, Operation, and Care of
N50 MIXER
SAVE THESE INSTRUCTIONS
GENERAL
The model N50 mixer is a 5 quart, countertop mixer equipped with
1
/6 H.P. motor, #10 attachment
hub, and cord and plug as standard equipment.
There are a variety of attachments and accessories available for the N50, and these are explained in
a separate
Use and Applications Handbook
which is supplied with each mixer.
INSTALLATION
UNPACKING
Immediately after unpacking the mixer, check for
possible shipping damage. If this machine is found
to be damaged after unpacking, save the packaging
material and contact the carrier within 15 days of
delivery.
Prior to installation, test the electrical service to
assure that it agrees with the specifications on the
machine data plate.
LOCATION
Place the mixer on a suitable sturdy level surface.
There should be adequate space around the mixer
for the user to operate the controls and install and
remove bowls.
ELECTRICAL CONNECTIONS (Cord Connected Mixers)
WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE-PRONGED
GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE.
IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG.
MODEL N50 MIXER