Filter
Top Products
OV500 SERIES RACK OVEN - REMOVAL AND REPLACEMENT OF PARTS
OV500G2 OVENS
OV500G1 OVENS
5. Remove screw securing hot surface ignitor to
burner side rack assembly, and pull ignitor out.
6. Remove screws securing burner rack enclosure
from oven.
7. Remove burner firing plates OV500G1 &
OV500G2.
8. Remove burner angle rack OV500G1 &
OV500G2.
9. Remove steam and exchanger compartment
panels.
10. Remove steam ball assemblies.
11. Access draft inducer box on top of oven and
remove. Disconnect deflector baffle from
hangers above heat exchanger tubes and
remove from top of tubes OV500G1 &
OV500G2.
12. Lower leveling post to allow room at flue
connection and transition chamber.
13. Remove screws securing heat exchanger tube
sections from oven. Early modes only have
more than 3 screws.
F25361 (January 2010)
Page 20 of 60