Filter
Top Products
3 - 6
Trigger Modes Enum
HHP_MANUAL_SERIAL = 0,
Requires trigger to scan (either software or hardware). No Low
Power Mode.
UNUSED, Unused.
HHP_MANUAL_LOW_POWER,
Requires trigger to scan (either software or hardware). Image
enters low power mode based on low power mode timeouts.
HHP_PRESENTATION,
The imager uses ambient light to detect barcodes. For further
information please see the 5X80 Integration Manual.
HHP_SCANSTAND,
Constantly looks for the scan stand barcode. When the imager
detects a barcode that is different from than the scan stand
barcode, it initiates a full trigger. For further information please
see the 5X80 Integration Manual.
HHP_HOST_NOTIFY
HHP_SNAP_AND_SHIP
Captures and sends an image when triggered (instead of
scanning for barcodes).
Sequence Mode
HHP_SEQ_DISABLED = 0, Sequence mode disabled.
HHP_SEQ_ENABLED, Sequence mode enabled but not required.
HHP_SEQ_REQUIRED Sequence mode enabled and required.
Serial Port Baud Rates
SERIAL_BAUD_300 = 300, 300 BPS
SERIAL_BAUD_600 = 600, 600 BPS
SERIAL_BAUD_1200 = 1200, 1200 BPS
SERIAL_BAUD_2400 = 2400, 2400 BPS
SERIAL_BAUD_4800 = 4800, 4800 BPS
SERIAL_BAUD_9600 = 9600, 9600 BPS
SERIAL_BAUD_19200 = 19200, 19200 BPS
SERIAL_BAUD_38400 = 38400, 38400 BPS
SERIAL_BAUD_57600 = 57600, 57600 BPS
SERIAL_BAUD_115200 = 115200, 115200 BPS
// Baud Rates that Require USB Serial or SIO950 Compatible Serial Port Driver
SERIAL_BAUD_230400 = 230400, 230400 BPS
SERIAL_BAUD_460800 = 460800, 460800 BPS
SERIAL_BAUD_921600 = 921600, 921600 BPS
Baud Rates that Require USB Serial or SIO950 Compatible Serial Port Driver
SERIAL_BAUD_230400 = 230400, 230400 BPS
SERIAL_BAUD_460800 = 460800, 460800 BPS
SERIAL_BAUD_921600 = 921600 921600 BPS