27
c) Sanitizing Solution
Dilute0.82.oz.(25ml)ofa5.25%sodiumhypochloritesolution(chlorinebleach)with
1.6 gal. (6.0 l) of warm water.
d) Sanitizing Procedure - Following Cleaning Procedure
1)Makesurethecontrolswitchisinthe"OFF"position,thepowersupplyisoff,andthe
icemaker water supply line shut-off valve is closed.
2)Removethefrontandtoppanels,thenmovethepowerswitchtothe"OFF"position.
3) Remove the storage bin cover. Remove spout B, then remove spout A.
4) Pour the sanitizing solution over the extruding head until the evaporator assembly and
the reservoir are full and the solution starts to overow into the drain pan.
5) Replace spout A, spout B, and the storage bin cover in their correct positions.
6) Allow the icemaker to sit for 10 minutes before operation.
7)Movethepowerswitchtothe"ON"positionandreplacethepanelsintheircorrect
positions.Turnonthepowersupply,thenmovethecontrolswitchtothe"ICE"position.
Make ice using the solution until the icemaker stops making ice.
8)Movethecontrolswitchtothe"OFF"position,pausemomentarily,thenmovetothe
"DRAIN"position.Allowthewatersystemtodrainfor5minutes.
9)Movethecontrolswitchtothe"OFF"position,pausemomentarily,thenmovetothe
"ICE"position.Opentheicemakerwatersupplylineshut-offvalvetosupplywatertothe
reservoir.
10)Afterthegearmotorstarts,movethecontrolswitchtothe"OFF"position,pause
momentarily,thenmovetothe"DRAIN"position.Allowthewatersystemtodrainfor
5minutes.
11)Movethecontrolswitchtothe"OFF"position,pausemomentarily,thenmovetothe
"ICE"position.Allowtheicemakertorunfor30minutes,thencleanandsanitizethe
dispensing components as outlined below.
2. Dispensing Components
Perform after cleaning and sanitizing the water system as outlined above.
a) Cleaning Solution
Dilute9.6.oz.(0.29l)ofHoshizaki"ScaleAway"with1.6gal.(6.0l)ofwarmwater.
b) Sanitizing Solution
Dilute0.82.oz.(25ml)ofa5.25%sodiumhypochloritesolution(chlorinebleach)with
1.6 gal. (6.0 l) of warm water.
c) Cleaning and Sanitizing Procedure
1)Movethecontrolswitchtothe"OFF"position,thenturnoffthepowersupply.
2)Removethefrontandtoppanels,thenmovethepowerswitchtothe"OFF"position.
3) Remove the storage bin cover.