Filter
Top Products
10
B. Removal and Replacement of Solenoid
1) Unplug the unit from the electrical outlet.
2) Remove the panels.
3) Disconnect the connectors from the solenoid leads.
4) Remove the solenoid, and install a new solenoid.
5) Connect the connectors to the solenoid leads.
6) Replace the panels in their correct positions.
7) Plug the unit back in.
C. Removal and Replacement of Water Valve
1) Unplug the unit from the electrical outlet.
2) Close the water supply line shut-off valve.
3) Remove the panels.
4) Loosen the fitting nut. Be careful not to lose the washer.
5) Disconnect the terminals from the water valve.
6) Remove the screws attaching the valve bracket to the machine wall, then remove the
bracket and valve from the unit.
7) Remove the valve from the bracket.
8) Attach the short dispense hose and hose clamp to the new water valve (reuse the ones
from the previous valve or install new).
9) Install the new water valve, and replace the removed parts in the reverse order of which
they were removed. Make sure the washer is in place in the fitting nut.
10) Open the water supply line shut-off valve.
11) Plug the unit back in.
12) Check for leaks.
13) Replace the panels in their correct positions.