Filter
Top Products
8
Problem Possible Cause Remedy
3. Bad contacts. 3. Check for continuity and
replace.
b) Water Supply 1. Off or disconnected. 1. Turn on or connect.
c) Dispense Switch 1. Bad contacts. 1. Check for continuity and
replace.
2. Loose connection. 2. Tighten.
[3] Abnormal noise. a) Gear Motor or Gear
Head
1. Bearing worn out. 1. Replace.
2. Grease leaks. 2. Supply grease and
replace O-ring.
b) Mechanism 1. Bad setting. 1. Apply oil and readjust.
2. Bad alignment of
sprocket.
2. Readjust.
3. Foreign matter
interrupting agitator.
3. Remove foreign matter.
c) Solenoid 1. Overload due to
loosening screws.
1. After tightening, apply
thread sealant to the
parts.
2. Foreign matter on
plunger.
2. Clean.
[4] Ice supply in storage
bin often melts.
a) Bin Drain 1. Clogged. 2. Unclog.