Filter
Top Products
7
2. Built-In Installation Site
NOTICE
• Do not let the weight of the counter rest on the unit. There must be at least 1"
(3cm) clearance between the top of the unit and the bottom of the counter.
• Do not install the unit in a corner where the door will interfere with other
equipment or where the unit cannot be pulled out for service.
Installation Space
Model Height Width Depth
HR24A 34" (864 mm) minimum 24" (610 mm) minimum 24-1/2" (623 mm) minimum
Min. 34"
(864 mm)
Min. 24"
(610 mm)
Between Two Cabinets Between a Cabinet and
the End of a Counter
Support: Do not
let the weight of
the counter rest
on the unit.
Min. 32"
(813 mm)
Oven
Refrigerator
Between a Cabinet and
a Wall or Tall Cabinet
In a Corner
Secure: Do not
let the weight of
the counter rest
on the unit.
Min. 34"
(864 mm)
Min. 24"
(610 mm)
There must be at least 1" (3cm) clearance between
the top of the unit and the bottom of the counter.
There must be at least 1" (3cm) clearance between
the top of the unit and the bottom of the counter.
Top Trim
Toe Kick