Filter
Top Products
12
1) Dilute approximately 7.2 fl. oz. (214
ml) of recommended cleaner Hoshizaki
“Scale Away” with 0.8 gal. (3.0 lit.) of
water.
2) Turn off the power supply.
3) Remove all ice from the storage bin.
4) Remove the front panel.
5) Remove the screw, and then move the
water tank drain pipe to the drain
position. See Fig. 5. Use the screw to
secure the water tank drain pipe in the
drain position.
6) Make sure the control switch is in the
“ICE” position, and then replace the
front panel.
7) Close the icemaker water supply line
shutoff valve.
8) Turn on the power supply for 3
minutes. The water tank drains and cubes
are removed from the evaporator.
9) Turn off the power supply.
10) Remove the front panel and top
panel.
11) Move the control switch to the
“WASH“ position.
12) Slowly pour the cleaning solution
over the top of the evaporator and into
the water tank. Do not splash or spill the
solution onto other parts.
13) Replace the front panel and top panel
in their correct positions.