Filter
Top Products
13
14) Turn on the power supply to start the
washing process.
15) Turn off the power supply after 30
minutes.
16) Open the icemaker water supply line
shut-off valve. See Fig. 4.
17) Remove the front panel.
18) Move the control switch to the "ICE"
position.
19) Replace the front panel.
20) Turn on the power supply for 3
minutes. The water tank drains.
21) Turn off the power supply.
22) Repeat steps 20 and 21 three more
times to rinse thoroughly.
SANITIZING:
1)
Dilute a 5.25% sodium hypochlorite
solution (chlorine bleach) with water
(add approximately 0.4 fl . oz. (12
ml) to 0.8 gal. (3.0 lit.) of water).
2) Close the icemaker water supply line
shut-off valve.
3) Turn on the power supply for 3
minutes. The water tank drains.
4) Turn off the power supply.