Filter
Top Products
2
20mm
All IM models have similar sequence of operation. This manual is designed as a
generic IM Training manual.
The Hoshizaki IM series ice machine
uses a horizontal evaporator design
which forms a square cube shape with a
small dimple.
A standard 120-volt power cord (field
supplied) provides the electrical
connection. The unit is designed to
operate on a separate 20-amp circuit.
The water supply connection is 1/2” FPT
fitting and is located at the top right side
of the unit. A minimum 1/4” water line
is required for proper operation.
The drain connection is 3/4” FPT fitting
located on the right rear of the unit. A
standard 3/4” MPT fitting can be used to
connect this drain.