Filter
Top Products
20
b) Service Menu Chart
Service
Menu
Item and Details Setting Range Display
Factory
Default
01 Extended Wash Cycle Time 1 to 99 seconds
(in 10 second steps)
1 to 99 30
02 Extended Rinse Cycle Time 1 to 99 seconds
(in 1 second steps)
1 to 99 15
03 Auto Fill Cycle Rinse Time 0 to 99 minutes
(in 1 minute steps)
0 to 99 13
04 Wash Temperature Setpoint Fahrenheit 32 to 176
°F
(in 1
°F steps)
32 to 176 163
Celsius 0 to 80
°
(in 1°
C steps)
0 to 80 73
05 Rinse Temperature Setpoint Fahrenheit 32 to 185
°F
(in 1
°F steps)
32 to 185 185
Celsius 0 to 85
°
(in 1°
C steps)
0 to 85 85
06 Booster Tank Heating Time 0 to 99 seconds
(in 10 second steps)
0 to 99 0
07 Supplementary Fill Cycle Time 0 to 990 seconds
(in 10 second steps)
0 to 99 450
08 Booster Tank Auto Fill Delay Time 0 to 99 seconds
(in 1 second steps)
0 to 99 10
09 Water Temperature Display ON: wash water temperature
OFF: rinse water temperature
on or oF on
10 Booster Tank Auto Fill Timer 1 to 99 minutes
(in 1 minute steps)
1 to 99 20
11 Booster Tank Temperature Correction Fahrenheit 0 to 9R
(in 1
R steps)
0 to 9 0
Celsius 0 to 5K
(in 1K steps)
0 to 5 0
12 Water Temperature Display Change ON: alternate
OFF: fi xed
on or oF on
13 Temperature Display Scale Fahrenheit or Celsius
°F or °C °F
14 Water Temperature Display Change
Cycle Time
1 to 10 seconds
(in 1 second steps)
1 to 10 5
15 Low Water Temperature Lock Function ON: lock function on
OFF: lock function off
on or oF oF
16 Wash Tank Refi ll Alert ON: alert on
OFF: alert off
on or oF oF
17 Total Operation Time Before Alert 10 to 600 minutes 1 to 60 12 (2h)
18 Display Hold Function ON: stays on
OFF: goes off after preset time
on or oF oF
19 Power Supply Lock Function ON: "Ch" keeps fl ashing until
electrode is turned off
OFF: "Ch" goes off when "ON/
OFF" button is switched off
on or oF oF
21
through
25
Error Log
Note: To erase the log, press and hold the
up and down buttons for 3 seconds with
one of the error codes displayed. The unit
beeps once and the entire log clears.
NA Most Recent
Errors
21 is most recent.
"--" is displayed if
the log is empty.
NA