Filter
Top Products
63
L. Removal and Replacement of Thermostat
NOTICE
Always use the recommended sealant (high thermal conductive type), Model
KE4560RTV manufactured by SHINETSU SILICONE, Part Code 60Y000-11, or
Part Code 4A0683-01 or equivalent.
When replacing the thermostat in the wash water tank or the booster tank, remove the
thermostat, clear any remaining sealant from the tank walls,
apply a proper amount of the
above recommended sealant to the new thermostat bulb, then install the new thermostat in
its correct position
.