Filter
Top Products
72
F. Long Storage, Relocation, Disposal, Transfer
When preparing the unit for long storage, shut down and clean the unit according to
sections A - E.
If something seems wrong when restarting the unit after long storage, turn off the power
supply, and immediately contact an authorized Hoshizaki service company.
WARNING
1. When restarting the unit after long storage, contact an authorized Hoshizaki
service company. To prevent electric shock, do not restart the unit by yourself.
2. In case of relocation, contact an authorized Hoshizaki service company.
Improper installation may cause water leak, electric shock or fi re.
3. When disposing of the unit, contact an authorized Hoshizaki service company.
Leaving the unit may violate laws or cause an unexpected accident.
NOTICE
When selling or transferring this product, tape the instruction manual and the
installation manual to the exterior to provide the new owner with information on
safe and proper use of the product.
VI. Operating Instructions
• Before loading dishes in the rack, be sure to remove any leftovers (ex. meat, fish,
vegetables), chopsticks, toothpicks, sticks, straws, paper products and plastics from
the dishes. They may clog the piping and wash pump, resulting in reduction of washing
performance or pump failure.
• Install the separator and tank filters without creating a large gap at the tank overlap.
Do not bang the tank fi lters and separator to clean or drain, or they may be deformed.
Leftovers and other foreign matter may enter the tank and clog the piping and wash
pump, resulting in reduction of washing performance or pump failure.
• Insert the drain pipe (overflow pipe) after installing the separator. The separator may
rise up to create a large gap at the tank overlap. Leftovers and other foreign matter may
enter the tank and clog the piping and wash pump, resulting in reduction of washing
performance or pump failure.
• After closing time, always clean the tank fi lters, wash/rinse spray arms and water level
sensor. When disassembling the spray arms, check and remove any leftovers clogging
the pipe joints. Otherwise the leftovers may become hard to remove or spoil.
• Read the instruction manual carefully to ensure safe and proper operation.