Filter
Top Products
74
they were removed.
5) Same as step 1.
6) Pour the sanitizing solution into the water tank, and allow the sanitizer to sit for 10
minutes.
7) Move the control switch to the “SERVICE” position and the service switch to the
“WASH” position.
8) After 15 minutes, move the control switch to the “OFF” position.
9) Move the control switch to the “SERVICE” position and the service switch to the
“DRAIN” position.
10) After 2 minutes, move the control switch to the “OFF” position.
11) Repeat steps 5 through 10 one time. Repeat steps 9 through 12 in the Cleaning
Procedure three times to rinse thoroughly.
12) Flush the storage bin with water.
13) Move the control switch to the “ICE” position, and start the automatic icemaking
process.
14) Close the door. Replace the louver in its correct position.
2. MAINTENANCE
[a] EXTERIOR PANELS
To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a
damp cloth containing a neutral cleaner to wipe off all oil or dirt build up.
[b] STORAGE BIN AND SCOOP
* Wash your hands before removing ice. Use the plastic scoop provided (Accessory).
* The storage bin is for ice use only. Do not store anything else in the bin.
* Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.
* Clean the bin liner by using a neutral cleaner. Rinse thoroughly after cleaning.