Filter
Top Products
It should not normally be necessary
to clean the Stay Clean panels with
water. If the user feels it is desirable
to do so, wash them down in warm,
soapy water, followed by rinsing with
clear water: Do not use biological/
enzyme washing powder, harsh
abrasives or oven chemical
cleaners of any kind. Replacement
oven liners arE available should you
require them, from your nearest
Hotpoint Service Centre (see back
page).
Replacement of Oven Lamp
Open the oven door and remove
the rod shelves. Grip the light glass
dome, unscrew anti-clockwise and
lift out. Reach into the aperture with
fingers, and unscrew the faulty lamp
anti-clockwise (15W 300˚C SES)
which can be obtained from your
nearest Hotpoint Service Centre. Fit
replacement lamp, and refit dome.
When screwing and unscrewing the
faulty lamp use a thick cloth to
protect your fingers should the lamp
break.
Oven Door Removal Main (Lower)
Oven
The door is removable to facilitate
occasional cleaning of heavy soiling
from the oven floor and from the
door itself.
Please note that the door is heavy
and care should be taken not to
pinch your fingers during the
removal and replacement.
To remove, open the door fully and,
using a coin or screwdriver, turn the
two discs clockwise. Slightly close the
door, unhook the lower hinge
fingers, then pull the door away from
the oven front frame.
To replace, insert the lower fingers
and the hooked ends of the door
stays, ensuring that the slots in the
lower fingers engage with the front
frame.
Fully open the door and turn the
discs anti-clockwise to their normal
working positions.
Close the door - the hinge will now
lock into position.
Care and Cleaning
45
WARNING: ISOLATE THE COOKER
FROM THE SUPPLY BEFORE
REPLACING THE LAMP, TO AVOID
ELECTRIC SHOCK.
WARNING: ISOLATE COOKER
FROM SUPPLY BEFORE
REMOVING DOOR.