Hotpoint BL31 Refrigerator User Manual


 
If your Integrated Larder Fridge Won’t Work
.....Don’t Panic!!!
Just run through these quick checks before
calling your nearest Service Office.
1. Check that the plug is firmly in the wall
socket and that the power supply is on.
2. Check the power supply to the socket by
plugging in another appliance.
3. If the other appliance works,check the
fuse in the Larder Fridge’s plug.
4. If you have changed the plug,check the
wiring (see page 2).
5. Make sure the appliance is switched on
(the thermostat knob is not in the OFF
position)
6. If there is excessive noise or vibration,
ensure the Larder Fridge is raised fully to
touch the underside of the worktop.
Normal noises may be heard such as;
gurgling and the flow of liquid,this may
be louder when the appliance is first
switched on.
7. If the interior light fails to work,refer to
page 12 for further instructions.
8. If water appears on the inside floor or
under the salad bins,check that the gutter
drain hole has not become blocked,the
drain hole may be cleared by pushing the
end of a pipe cleaner or drinking straw
through the drain hole and gently moving
it up and down.(NB Water droplets on the
cooling plate or back wall are normal).
If,after following all these instructions,you are
still having problems,contact your nearest
Service Office (see back page).
14