WARNING:CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH THE APPLIANCE OR
TAMPER WITH THE CONTROLS.
BL31 FEATURES:
1 Shelf
2 Defrost water outlet
3 Crisp tray and serving tray
1.Shelf
The shelves are adjustable and can be pulled
out and used on any of the guide slots.They
can also be used in a tilted position to allow
the safe storage of bottles,jars etc.on there
sides.To tilt a shelf,place the back of the shelf
on a lower slot than the front.
2.The defrost water outlet
The interior of the refrigerator is cooled with a
cooling plate incorporated in the rear wall.
Under the plate there is a channel and an
outlet for the defrosted water.
Regularly check the outlet and channel for
food deposits which could clog the drain hole.
If the hole is blocked,use a plastic straw to
clean it out.
3.Crisp tray and serving tray
The tray at the bottom of the refigerator is
covered with the serving tray.This cover
protects stored food from excessive drying.
The door liner
The door liner consists of various shelves or
holders used for storing eggs,cheese,butter
and yogurt as well as other small packages ,
tubes,cans etc.
The lower shelf is used for storing bottles.
The interior light
The light will come on when the door is
opened.
8
Get to know your Integrated Larder Fridge
Model
BL31