Filter
Top Products
10
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
- “Auto” and the duration alternately, if programming is
automatic.
4. Press the
button to begin cooking.
5. The oven will begin its preheating phase, the
preheating indicators will light up as the temperature
rises.
6. When the preheating process has finished, a buzzer
sounds and all the preheating indicator lights show that
this stage has been completed: the food can then be
placed in the oven.
7. During cooking it is always possible to:
- modify the temperature by turning the THERMOSTAT
knob (manual modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously
in its memory (manual modes only);
- switch off the oven by pressing the
button
for 3 seconds.
8. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the temperature
has not dropped below a certain level. Programmed
cooking modes which have not yet started will not be
restored and must be reprogrammed (for example: a
cooking mode has been programmed to start at 20:30.
At 19:30 a blackout occurs. When the power supply is
restored, the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards the
bottom of the oven door.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
The
button can be used to switch on /switch off the
light at any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” bar on the
display lights up to indicate high temperatures inside
the oven cavity. The individual segments of the bar
switch off one by one as the temperature inside the
oven falls.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then keep the SELECTOR knob turned while pressing
the
button for 6 seconds. Once the restore
procedure is complete, a buzzer will sound. The first
time the
button is pressed, the oven will behave as
if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel lock has
not been activated, the appliance automatically reverts
to standby mode. The standby mode is visualised
by the high luminosity “Watch Icon”. As soon as
interaction with the machine resumes, the system’s
operating mode is restored.