Hotpoint EG94 Range User Manual


 
29
Care and Cleaning
WARNING: TO AVOID ELECTRIC SHOCK, BEFORE REPLACING THE OVEN LIGHT,
SWITCH THE COOKER OFF AT THE COOKER CONTROL UNIT
(and allow to cool if the oven has been used).
Replacement of
the Oven Light
Unscrew the glass cover, using a suitable cloth to protect the
fingers and remove carefully. Unscrew the existing light bulb, and
remove. Screw the new bulb into position and replace the glass
cover, with metal washer, until positioned securely.
Hotplate Burner
Caps and Pan
Supports
Hotplate Burner
Bodies
Door and Control
Panel (Glass)
Door and Control
Panel Trims
(Stainless Steel)
Solarplus Grill
Cloth wrung out in warm soapy water. Stubborn stains can be
removed with a cream paste, liquid cleaner or by rubbing with fine
steel wool soap pads.
NB. Check that the cleaning agent is approved by the Vitreous
Enamel Association.
Use a nylon brush to remove any cleaning materials, water or dirt
from the hotplate burner bodies.
Regularly wipe with a clean, damp cloth and polish with a clean, dry
cloth.
Regularly wipe with a clean, damp cloth and polish with a clean, dry
cloth.
To clean the solarplus grill use a clean, damp cloth and wipe over. If
stubborn stains remain, gently clean with a well soaped nylon
scouring pad and wipe over with a damp cloth.
NOTE: DO NOT use metal cleaning utensils, wire wool or proprietary
oven cleaners on the grill element mesh.
continued...