Filter
Top Products
8
Rinse aid.
Rinse aid makes dishes sparkle
more as it improves their drying. The
rinse aid container is situated on the
inside of the door.
You should fill the rinse aid container
when indicator D lights up on the
container (see right) and the rinse
aid indicator light "U" on the control
panel flashes.
Adding rinse aid.
To open the dispenser, turn cap C
anticlockwise. Take care when you
pour in the rinse aid to avoid it
overflowing.
The detergent
Each time you load the dishwasher,
add detergergent. Pour dishwasher
detergent into thedispenser on the
inside of the door.
Adding detergent
To open lid A, press button B.
The detergent should be put into the
two containers C and D.
If using a tablet, put it in container
"D".
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
the dispenser. Remove the excess.
You can regulate the amount of rinse aid used by the dishwasher,
move the adjuster F which you will find under lid C.
You can choose from six different positions. It is normally set to 4.
Before Using your Dishwasher
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
• Use the right amount of detergent
(see programme chart).
• Store your detergent and rinse aid
in a cool, dry place, safely away from
children.
B
D
C
A
Warning
Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.
If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the
formation of white streaks on your dishes or on the interior of the appliance.
Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.
If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.
In any case, please read the manufacturer's instructions on the packet.
If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of
cycles.
F
C