Filter
Top Products
Installation
19
(6")
150mm
MIN.
(6")
150mm
MIN.
500mm
(20")
500mm (MIN)
APPLIANCE
Note: Take care when moving the cooker as it is heavy. Take care to ensure that any
floor covering is not damaged.
Note: The appliance should NOT be placed on a base.
SITING
The cooker is designed to fit between kitchen cabinets spaced 500mm apart
minimum. The space either side need only be sufficient to allow withdrawal of
the cooker for servicing. It can be used with cabinets one side or both as well as
in an angled corner setting. It can also be used free-standing.
Adjacent side walls which project above hob level, should be protected by heat
resistant material, but in any case should not be nearer to the cooker than
150mm. Any overhanging surface should not be nearer than 500mm.
Excess steam from the oven is expelled at the rear of the cooker, therefore the
wall behind the cooker needs to be protected against grease and moisture.
MOVING THE COOKER
Before moving your cooker ensure that it is cool and note that it is heavy.
Movement of your cooker is most easily achieved by lifting the front as follows:
Open the oven door sufficiently to allow a comfortable grip on the underside
front edge of the oven roof.