Hotpoint HCM60 Coffeemaker User Manual


 
#
AMC-3
Side view and controls
DESCRIPTION OF THE MACHINE
Safety instructions and warnings
This machine complies with the current safety regulations. Incorrect use of the machine may cause harm.
Read the instructions carefully before using the machine. They contain important information on safety, use and maintenance,
to provide protection and to avoid damaging the machine.
Correct use
• This machine is designed solely for preparing espresso, cappuccino and long coffee and for boiling water for tea and other
hot drinks.
Other types of use are not permitted and may prove dangerous. The manufacturer will not be held liable for any damage
caused by incorrect use of the machine.
Technical safety
• Before connecting the machine to the electricity supply, check the connection data (voltage and frequency) on the data
sheet with that of the electricity supply thoroughly.
This data should be exactly the same to avoid damaging the machine. In case of doubt, contact a qualified electrician.
• The electrical safety of the machine is only guaranteed if it is connected to a regulation earth wire. It is very important to
check this carefully. In case of doubt, have the electricity supply checked by a qualified electrician. The manufacturer will
not be held liable for any harm or damage caused due to a lack or malfunctioning of the earth wire (e.g. risk of electric
shock).
• Only operate the machine when built-in so as to avoid contact with the electric parts. For the assembly, dismantling and
daily maintenance of the machine, always make sure it is disconnected from the electricity supply.
• The machine should not be connected to the electricity supply with extension cables, as these do not provide the necessary
safety for the machine (e.g. danger of overheating).
• The machine may also be built into a cabinet (special accessory). It is not suitable for outdoor use. Due to the weight of
the machine, the cabinet must be secured firmly to the wall.