Filter
Top Products
.
DOOR LATCH
“OFF” POSITION
TIME
ENERGY
TO END
CYCLE PHASE
MONITOR
I
OF CYCLE
I
I
1~~
STEP 5
STEP6
Systems Monitor
Select an option
●
HEATED DRYING
provides
faster drying. Can be changed
while cycle is running.
● ENERGY SAVER shuts off
drying heater. Dishes air-dry
naturally. It takes longer, but saves
energy. You can prop door open
about 3 inches after motor stops
to speed drying. Excellent for
overnight drying.
● SANI ON-OFF. Select with
either POTS & PANS or NORMAL
WASH. Heats water in final rinse
to 140
Q145°F.
Touch pad once for
ON, once more for OFF. This
option may be changed at any time
before or after start of cycle.
Stirt
the dishwasher.
●
When you’re ready to wash
dishes, touch the START pad.
Dishwasher will proceed through
your entire program and turn off
automatically.
To delay the stirt,
touch DELAY
START pad. The SYSTEMS
MONI~R
will
read “1
hrs
delay:’
Touch pad once again for each
hour desired up to 9 hours. The
machine will count down and start
automatically at the correct time.
Note: Don’t forget to put detergent
in cup and
close cup. Do not use
DELAY START with the RINSE &
HOLD cycle.
To
change
a
cvcle
after
washing
stirts,
t;uch
tie
CLEAR/RESE~
pad to cancel cycle. After water is
pumped out and motor stops, you
can reprogram and restart the
dishwasher.
5
This panel tells you what is
happening in the dishwasher and
can alert you to some possible
problems.
Information displayed:
c
Selected wash cycle
● Selected dry option
c
Minutes to end of cycle
●
Cycle phase, such as WASHING,
RINSING or DRYING
●
Diagnostic codes to alert you to
possible problems
. Relative energy used by each
cycle. Lets you choose the cycle
you need that uses the least energy.
See pages 7-10 for explanation of
displays and codes.