Filter
Top Products
~
m
Questions?
~
Use This Problem Solver
-
PROBLEM
DISHWASHER
WON’T RUN
UNUSUAL NOISE
DISHES DON’T DRY
UNCLEAN DISHES
AND
FLAWARE
BMK
OR GRAY
MARKS ON DISHES
DETERGENT LEFT
IN
DISPENSER CUPS
POSSIBLE CAUSE AND REMEDY
A
fise
in your
home may be blown, or the circuit breaker
tripWd.
Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be
sectlre
on rack pins. Or something small may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely placed
in dishwasher.
Make sure inlet water temperature is
corrwt.
(See page 6.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into
tl
bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
Check inlet water tem~rature.
it
should beat least
120°F.
(To test, seepage 6.)
To
obmin
the benefits of a complete
qcle,
be
carefil
that you
do not turn the dial an
firther
than
necessary to start
the
dishwasher.
Water pressure may be temporarily low. Turn on a faucet.
Is
water coming out slower
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See page 11.)
Improper rack loading. (See pages 8 and 9.)
Aluminum
d~sifi
often
leave
marks when they rub against other things. Remove
marks with a mild abrasive cleanser.
Water
may not be reaching the detergent cups. Move dishes that maybe blocking
detergent
cup.
The dispenser cover may not be opening or may be blocked by improperly loaded
items. If you used a powder detergent, open the
cup
and remove any caked-on
d~~ertt.
If the cup still doesn’t open automatically,
cdl
for service.
De&qent
maybe old. If the powder detergent is hard or
caked
in the box, throw it
aws
The
detergent may not be working well. Try another brand.
12