Filter
Top Products
How to operate your dishwasher
Door Latch Cycle Indicator Dial
(Locked)
(Turn to Start)
(
{
~lm
::
“G”T;’@
..:::::
B
L
STEP 1.
Load
your dishwasher
with
dishes, silverware, pots, pans,
bowls, etc. according to
instructions on pages 8 and 9.
STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
See pages 6 and 7.
Use rinse aid agent to help prevent
spotting. See page 6.
STEP 3. Select DRYING HEAT
Option. It must be ON for PLATE
WARMER cycle, OFF for RINSE
HOLD cycle. It can be ON or OFF,
at your option (see below), for any
of the wash cycles.
DRYING
HEAT OFF
u
DRYING
HEAT ON
DRYING HEAT ON. Turns the
drying heater on for fast drying.
DRYING HEAT OFF.
~rns
the
drying heater off to save energy.
Dishes will dry naturally over a
longer period such as overnight.
If you need your dishes sooner,
open the dishwasher door
afier the
cycle is complete to reduce the
natural drying time.
STEP 4.
Select the Cycle and start
dishwasher.
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
selection hints on next page. )
To obtain the benefits of a
comDlete
cycle, be careful that you
do
n;t
turn the dial any further than
necessary to start
the
dishwasher.
●
For NORMAL WASH cycle:
a. Latch the door.
LIGHT WASH
■
ON
W
OFF ■
@
8
, RINSE
::f~~
HOLO .,.,
E
PLATE WARMER
■ SELE~ORYINGHEA1a
b. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
There is a time delay between
start-up and water fill so you will
not hear any wash action right
away.
●
For LIGHT WASH cycle:
a. Be sure door is unlatched.
b. Slowly turn Cycle Indicator Dial
to LIGHT WASH position.
c. Latch door to start the cycle.
● For RINSE HOLD cycle:
a. Be sure door is unlatched.
b. Select DRYING HEAT–OFF
drying option.
LIOHTWASH ■
ON ■
OFF ■
@
■
, RINSE
::::.:
HOLO .,.,
=
PLATE WARMER
■ s, LE~O.YINGHEAT%
c. Slowly turn Cycle Indicator
Dial to RINSE HOLD position.
d. Latch door to start the cycle.
Use of this option reduces the
electrical energy used by this
model approximately 10% for
the NORMAL WASH cycle.
4