Filter
Top Products
●
For PLATE WARMER cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT–ON
drying option.
c.
have
the door unlatched.
LIGHT WASH
-
ON
m
OFF
8
@
.
~,N~E
SELECT
#
HOLO
H:::’&F
PLATE WARMER
■ SfLE~OR”lNOHEAT~
I
I
d. Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
e. Latch the door to start the
qcle.
What happens in each cycle
Cycle selection hints
It is important to follow the loading
RINSE HOLD—For rinsing
instructions on pages 8 and 9.
partial loads which will be washed
NORMAL WASH—For most
later. Select DRYING HEAT–
loads of everyday dishes, glasses
OFF drying option. Do not use
detergent.
and cookware with medium soils.
LIGHT WASH–For dishes
PLATE WARMER—For warming
clean dishes and serving plates for
that have been
pre-rinsed
before
loading. Also, for washing
very
lightly
soiled dishes with soils
that have not dried on.
Wash
Water Use
Cycle
Time
wash
Gallons (approx.
Cycl=
(approx.) minutes)
Cycle Sequence
NO~AL
WASH
10.7
,,*
~lFl~lFIFIF]
LIGHT WASH
8.9
51
mHBBE
RINSE HOLD
5.1
15
EBB
*DRYING HEAT—ON:
Add 28 minutes.
the serving of hot food.
-
●
You’ll hear occasional clicking
sounds:
–Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
c
During the drying period:
—The motor stops.
—Water vapor is released through
the vent under the door handle.
It maybe visible.
5