Hotpoint MWH211 Microwave Oven User Manual


 
9
SELECTION OF COOKING TIME:
Use “- Time +” knob to select the cooking time.
A rotation from right to left increase selected tim and the opposite reduces it.
From “00:00” to “05:00” minutes, the increment is 10 seconds.
After “05:00”, is the increment is 1 minute.
Timer is up to 30 minutes.
SELECTION OF POWER:
The standard power level is the maximum level. For a fast operation it is better to select only time with
the “- Time +” knob and launch cooking with the “Stop/Start ” button. You can also adjust the power
level by pushing the “Power Level button. Each push reduces cooking power level, until the lowest
level (indicated by the left icon on the display). If you continue to push, you progressively go back to
the highest levels. At the end of cooking, the oven automatically resets the highest levels. At the end
of cooking, the oven automatically resets the highest power level.
START:
Push the “Stop/Start” button to launch cooking. The internal lamp lights on, the glass plate starts to
turn and cooking starts. At the same time, the display starts to count down until the end of operating
or the user stops the unit.
SUSPEND:
You can open the door during cooking. This suspend the cooking process and count down. It is not
necessary to push the “Stop/Start” button or to reprogram time.
If food is cooked enough or if you want to take it out from the oven, you should push the “Stop/Start
button or the reset key marked “00:00” before closing the door, because the oven should not be used
without anything inside.
STOP COOKING:
By pushing the “Stop/Start” button, you can stop cooking. Timer is stopped but time is still on display.
If you push again on “Stop/Start” button, cooking restart for the remaining time indicated on the
display.
RESET:
5 minutes after pushing the “Stop/Start” button, if your oven is not used, power level is automatically
reset to maximum and time is reset to zero.
You can push the “Clock/Reset” button to definitively stop cooking and reset the oven.
CHANGE POWER LEVEL OR TIME DURING COOKING:
To change the cooking time during cooking, turn the “- Time +” knob from right to left to increase
cooking time and in the opposite direction to decrease.
By bringing the timer to “00:00” you stop cooking.
To change the cooking power level, push on “Power Level” button. The display indicates the new
power level but the last program will first finish before changing power level.
10 seconds after the end of cooking or after stopping the unit, the display returns to the Clock mode
as indicated by the 2 points flicking.