Hotpoint RC16P Freezer User Manual


 
The Controls
Thermostat
The thermostat. located at the front of the freezer can be adjusted from minimum (1) to
maximum (7) using the thermostat control knob. A normal storage temperature of -18.C IS
recommended for most foods
Temperature Control
This is obtained by positioning the thermostat control knob to setting 3. This setting may
have to be varied depending upon the frequency of opening and closing the lid and for a
room temperature in excess of 2S"C (77"F).
To prevent children from changing the position of the thermostat control knob it is
necessary to use a coin or similar object to turn the knob.
Power 'ON' Indicator Light (green) This light only shows that the freezer is connected to
the mains. It does not give any Indication 01 the
temperature inside the freezer.
Super Freeze switch
(amber) This light will illuminate when the Super Freeze
switch is switched on. This switch overrides the
thermostat and the compressor will operate
continuously, lowering the cabinet temperature still
further.
Important:
When the freezer is first installed, switch on the Super Freeze switch (the amber light will
glow) and leave running for at least 4 hours before putting In frozen food. This will make
sure that the cabinet is thoroughly chilled before food IS put In. Remember to switch off
the Super Freeze switch. If the cabinet temperature IS considered to be incorrect, for
any reason, contact your nearest Hotpoint Service office (see Back Cover)
Freezing and Storing Fresh Food
Food to be fast frozen should be placed with as much contact to the walls of the freezer
as possible. Avoid placing unfrozen food in contact with frozen food Remember to
switch off the Super Freeze switch when the quick freezing is completed.