Filter
Top Products
Connect the green and yellow (Eanh) wire to the terminal coloured green and yellow or
marked 'E' or with the symbol ~
Connect the blue (Neutral) wire to the terminal co loured black or marked 'N'
Connect the brown (Live) wire to the terminal coloured red or marked 'L'
In the event of replacing a fuse In the plug supplied, a 13A AST A approved fuse to
BS 1362 must be fitted With alternative plugs a 15A fuse must be fitted either In the plug
or adaptor or In the main fuse box
If the plug is the moulded on type, the fuse cover must be refitted when changing the
fuse In the event of losing the fuse cover, the plug must not be used until a replacement
fuse cover has been obtained and fitted. A new fuse cover IS available from your nearest
Hotpolnt parts centre or your local Electricity Company. Identify a correct replacement by
comparing colour coding or markings on the base of the plug
Mains Lead Replacement
If the mains lead on your freezer needs replacing at any time, a special lead is available
from your nearest Hotpolnt Service Office (see Back Cover) A charge will be made If yol
have damaged the existing lead or require a longer lead
WARNING: HOW TO AVOID ACCIDENTS TO CHILDREN - DO NOT ALLOW
CHILDREN TO PLAY WITH THE FREEZER OR TAMPER WITH THE CONTROLS.
WHEN DISCARDING AN OLD FREEZER, BE CERTAIN TO MAKE THE LOCK
UNUSABLE. IF POSSIBLE, REMOVE THE DOORS AND DISCARD SEPERATELY.
DO NOT ATTEMPT TO STAND ON TOP OF YOUR FREEZER, IT IS NOT DESIGNED
FOR SUCH USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE FREEZER
BY SUCH ABUSE.
We recommend that this appliance is connected to the mains supply via a suitable
swlthced socket, In a readily accesible position
All Hotpolnt appliances come complete with a fitted plug. The plug on your freezer has a
13A fuse. II the plug does not fit your sockets: a new plug can be fitted. Cut off the old
plug and throw it away (DO NOT inser1lt into a socket elsewhere, as this could cause a
shock hazard)
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: Fitting a different plug -
The wires In the mains lead are coloured In accordance with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
If you fit your own plug. the colours of these wires may not correspond with the Identity
markIngs on the plug terminals. This IS what you hace to do: