Filter
Top Products
2
Electrical Requirements
We recommend that this appliance is connected to the mains supply via a suitable
switched socket, in a readily accessible position.
All Hotpoint appliances come complete with a fitted plug. The plug on your freezer has a
13A fuse. If the plug does not fit your sockets, a new plug can be flitted. Cut off the old
plug and throw it away (DO NOT insert it into a socket elsewhere, as this could cause a
shock hazard).
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: Fitting a different plug -
The wires in the mains lead are coloured in accordance with the followiing code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
If you fit your own plug, the colours of these wires may not correspond with the identity
markings on the plug terminals. This is what you have to do:
Connect the green and yellow (Earth) wire to the terminal coloured green and yellow or marked
‘E’ or with the symbol
Connect the blue (Neutral) wire to the terminal coloured black or marked ‘N’.
Connect the brown (Live) wire to the terminal coloured red or marked ‘L”.
In the event of replacing a fuse in the plug supplied, a 13A ASTA approved fuse to
BS1 362 must be fitted. With alternative plugs a 15A fuse must be fitted either in the plug
or adaptor or in the main fuse box.
If the plug is the moulded on type, the fuse cover must be refitted when changing the
fuse. In the event of losing the fuse cover, the plug must not be used until a replacement
fuse cover has been obtained and fitted. A new fuse cover is available from your nearest
Hotpoint parts centre or your Electricity Company. Identify a correct replacement by
comparing colour coding or markings on the base of the plug.
Mains Lead Replacement
If the mains lead on your freezer needs replacing at any time, a special lead is available
from your nearest Hotpoint Service Office (see Back Cover). A charge will be made if you
have damaged the existing lead or require a longer lead.
WARNING: HOW TO AVOID ACCIDENTS TO CHILDREN - DO NOT ALLOW CHILDREN TO
PLAY WITH THE FREEZER OR TAMPER WITH THE CONTROLS. WHEN DISCARDING AN
OLD FREEZER, BE CERTAIN TO MAKE THE LOCK UNUSABLE. IF POSSIBLE, REMOVE
THE DOORS AND DISCARD SEPERATELY. DO NOT ATTEMPT TO STAND ON TOP OF
YOUR FREEZER,IT IS NOT DESIGNED FOR SUCH USE AND YOU COULD INJURE YOUR-
SELF OR DAMAGE THE FREEZER BY SUCH ABUSE.