Filter
Top Products
GB
7
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts (if enabled in the
settings menu).
When models featuring LED INSIDE technology
begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” bar on the
display lights up to indicate high temperatures
inside the oven cavity. The individual segments of
the bar switch off one by one as the temperature
inside the oven falls.
Demo mode
! The appliance will not enter DEMO mode if the
language has not been selected beforehand.
The oven can operate in DEMO mode: all heating
elements are deactivated, and the controls remain
operative.
To activate DEMO mode, switch off the oven and
keep the control dial turned clockwise while pressing
for 10 seconds. A buzzer sounds and the
display shows “DEMO”.
To deactivate DEMO mode, keep the control dial
turned anticlockwise while pressing
for 3
seconds. A buzzer sounds to confirm deactivation.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (language, tone,
customised durations, etc…). To carry out a reset,
switch off the oven, then press and hold 6
,
and simultaneously for 6 seconds. Once the
restore procedure is complete, a buzzer will sound.
The first time the
icon is pressed, the oven will
behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption in standby mode. If no buttons are
pressed for 30 minutes and the control panel/door
lock has not been activated, the appliance
automatically reverts to standby mode. The ECO
Mode symbol appears on the display to indicate
standby mode. As soon as interaction with the
machine resumes, system operation is restored.