Filter
Top Products
9”
9
.7
5”
Cut out an opening for the housing.
C12
D
E
Slide the mounting rails into brackets.
5/8
1/2
5/8
1/2
C13
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
C14
Mark position of screws by using holes as a template.
C15
Drill a hole in the center of each outline.
C16
Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
C17
Attach the rails onto the screws.
C18
Tighten screws.
C19
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
C20
Pull wires through the strain relief.
12
13
C21
Tighten the strain relief screws.
41723-01 12/25/2004 41723-01 12/25/2004