Filter
Top Products
D13
2
1
D14
E
D15
Pull wires through strain relief.
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
A
3 Pin
2 Pin
Fan Motor
Light
Light
Green
Black
Black
Red
Red
White
Black
Black
White
White
Bare Copper
Ground
D16
Night Light
Night Light
Switch 1 (AC In)
Main Switch 1 (AC In)
Switch 2 (AC In)
*Option Fan & Main Light Together
*Option
Connect wires as shown.
D17
F
1
2
F
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
•
D18
G
Tighten the wiring cover plate screw.
16
17
Screw pre-loaded screws into joist or framing.
D19
H
D20
H
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched between
the motor and the housing.
Connect wiring from the motor to the wiring cover plate.
I
D21
D22
Secure the motor by tightening the 2 screws. Turn on the power source.
41723-01 12/25/2004 41723-01 12/25/2004