7
English
OPERATING INSTRUCTIONS
This portable ice maker uses a fully automatic control system, with an advanced
microcomputer for easy and convenient ice making. Making ice is simple and
fast. Just add water, plug into an outlet, and press the ON button. You can
select one of the three ice cube sizes with the touch of a button. When first
turning on the unit or during icemaking cycles, the compressor will stay idle for 3
minutes, while energizing.
There are warning indicators that alert you to fill water when the reservoir is
empty and to remove ice when the storage basket is full. The ice maker also has
built-in safeguards that can limit accidental damage, automatically shutting down
the system when necessary.
Pre-Operating Instructions
Please read carefully.
1. The tilted angle of the ice maker cabinet should not exceed 45˚
during transportation or use. Do not turn the appliance upside down.
Doing so could cause the compressor or refrigerating system to operate
incorrectly. When the ice maker is moved or transported, please allow time
for the fluids in the compressor to settle. Before using the ice maker for the first
time, please wait 2 hours after the unit has been leveled and positioned in its
proper place before plugging it in and turning it on.
2. Please ensure the ice maker is level
and on a stable table or platform
to avoid malfunction.
3. The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive
gases. Leave an 8" (20 cm) clearance on all sides of the ice maker for
proper ventilation.
4.
Do not fill the water reservoir with hot water. This may damage the ice maker.
It is best to fill the water reservoir with water of room temperature or lower.