Filter
Top Products
Series 322 Ice Cube Machine Installation Instructions
Publication Number: 166240006INS - 8 - © 2004-2007, IMI Cornelius Inc.
WATER TREATMENT
Depending on the water source for the ice maker, water treatment may be necessary to prevent calcium
or lime scale deposits, bad taste and odor, chlorine problems, as well as slime growth. If these conditions
exist, contact your Cornelius Distributor or Dealer for information on water treatment systems Cornelius
offers.
WINTER STORAGE
If the unit is to be stored in an area where the temperature will drop below freezing, it is most important
that all water lines be drained to prevent them from freezing and possible rupture.
To blow out the waterline, disconnect the water supply at the cabinet inlet and use air pressure to force
the water into the water reservoir pan. This can then be removed from the water pan.
CLEANING THE AIR COOLED CONDENSER COIL
In order to produce at full capacity, the refrigeration condenser must be kept clean. The frequency of
cleaning will be determined by surrounding conditions. A good maintenance plan calls for an inspection
at least every two months.
CAUTION - Condenser cooling fins are sharp. Use care when cleaning.
Clean the air condenser coil from the back of the machine with a vacuum cleaner. Remove all the
accumulated dust, lint, and dirt.