Filter
Top Products
Quest Juice Training Manual
Publication Number: TP00968 - 26 - © 2004, IMI Cornelius Inc.
REMOVAL OF THE ICE CONTROL PROBE
1.Carefully turn the chassis over to gain access
to the probe assembly.
Cut the wire tie holding the probe assembly
only. Push up and slide the probe assembly
off the bracket. DO NOT REMOVE THE
BRACKET.
2.The connector must be disassembled to pass
the wire leads through the water bath cover.
3.Carefully remove the grommet from the water
bath cover.
4.With the wire loose, pass the connectors first
through the grommet and the water bath
cover itself.
BE SURE TO REMEMBER THE WIRE
ORDER WHEN RE-ASSEMBLING
Yellow
Orange
Purple
Blue
Brown
Green/Yellow
Current version
GRAY wire
cover
Early version
BLACK wire
cover