Filter
Top Products
67161ĆXPAGE 4 OF 8
PROGRAMMING (continued)
This section of the menu is used to set Preset B value.
STEP
1
SETTING
PRESET B
STEP
2
SETTING
SCALING
FACTOR
STEP
3
SETTING
THE
COUNTER
PRESS DISPLAY REMARKS
PROG
ENTER
##### This is Preset B. To change, press the arrow key under the
digit(s) to change. Press ``enter" to enter the displayed valĆ
ue.
PROG
PROG
This section of the menu is used to set up the scaling factor
for the count input.
ENTER
This setsthe decimalfor factorA.Press thearrowkey under
the digit where the decimal is desired. To clear the decimal,
press the arrow key furthest to the right.
ENTER
This is the scaling factor for the count input. To change,
press the arrow key under thedigit(s) to change. Press``enĆ
ter" to enter the displayed value.
#####
PROG
PROG
PROG
ENTER
Press the ``PROG" key to choose ``RST 0" (reset to 0, count
up) or ``SET PR" (set to preset, count down), press the ``enĆ
ter" key to enter the displayed choice.
This section of the menu sets up the counter information.
ENTER
This sets the decimal location for the ``A" and ``B" counters.
Press the arrow key under the desired digit location. To
clear the decimal, press the arrow key furthest to the right.
Press the ``enter" key to enter the displayed location.
ENTER
This section sets the second counter operation. Press the
program key to choose``GR TOT" (grand total) or ``BATOT"
(batch total). Press the ``enter" key to enter the displayed
choice.
ENTER
Press the ``PROG" key to choose ``HIGH CPS" (0 Ć 9.99
KHz) or ``LOW CPS" (0 Ć 40 Hz). Press the ``enter" key to
enter the displayed choice.
or
or
or