AJ-44T Series Technical Manual 7610-003-07-21
Issued: 03-21-2006 Revised: N/A
SECTION 1: SPECIFICATION INFORMATION
OPERATING CHARACTERISTICS
2
RACKS PER HOUR:
AJ-44-66-80TE/TG/TS 204
DISHES OR GLASSES PER HOUR:
AJ-44-66-80TE/TG/TS 5100
PREWASH TANK CAPACITY (GALLONS):
AJ-66TE/TG/TS 17.25
AJ-80TE/TG/TS 17.25
WASH TANK CAPACITY (GALLONS):
AJ-44-66-80TE/TG/TS 20.4
PREWASH PUMP CAPACITY (GPM):
AJ-66TE/TG/TS 120
AJ-80TE/TG/TS 270
WASH PUMP CAPACITY
GALLONS PER MINUTE (ALL MODELS): 270
VENTING REQUIREMENTS (CFM)(100% CAP.):
INPUT END 200
OUTPUT END 400
TOTAL 600
CONVEYOR SPEED (FPM):
AJ-44-66-80TE/TG/TS MACHINES 5.7
GALLONS PER RACK:
AJ-44-66-80TE/TG/TS MACHINES .69
WATER TEMPERATURES:
AJ-44-66-80TE/TG/TS MODELS:
PREWASH (RECOMMENDED) (AJ-66 & AJ-80) 110-140°F
WASH (MINIMUM) 160°F
RINSE (MINIMUM) 180°F
FLOW PRESSURE (PSI) 20±5
FLOWRATE (GPM):
AJ-44-66-80TE/TG/TS 3.1
STEAM COIL TANK HEAT (TS MODELS ONLY):
STEAM INLET PRESSURE (PSIG) 10-20
STEAM CONNECTION NPT 3/4”
CONSUMPTION @ 15 PSIG (lbs/hr): 60
MOTOR ELECTRICAL CHARACTERISTICS:
DRIVE MOTOR HP 1/4
WASH MOTOR HP 2
POWER RINSE MOTOR HP 2
PREWASH MOTOR HP:
AJ-66TE/TG/TS MODELS 1
AJ-80TE/TG/TS MODELS 2
NOTE: Always refer to the machine data plate for specific
electrical and water requirements. The material provided
on this page is for reference only and may be subject to
change without notice.