Filter
Top Products
4444444444444444444444444
Care
and
Cleaning 8
4 4 4 4
4 4 4
444444444
Cleaning Chart -- continued
Parts
Surface
Burner Grates
Cleaning Procedure
+ Light Soil - Wash them in hot, soapy water, rinse and dry.
+ Moderate Soil - Clean with a soap-filled, nonabrasive, plastic pad or Cooktop
Cleaning Creme* (Part # 20000001) and a sponge. If soil remains, reapply Cooktop Cleaniq
Creme. Cover with a damp paper towel and soak for 30 minutes. Scrub again, rinse and dry.
4 Burned on Soil - Remove grates, place on newspapers and carefully spray with commercia
oven cleaner. (Do not spray surrounding surfaces.) Place in plastic bags for several hours
or overnight. Wearing rubber gloves, remove from bags. Wash, rinse, dry and replace on cookto
+ The grates are made of porcelain on cast iron and are very durable, however, they may
gradually discolor. This is due to exposure to high temperatures from the gas flame.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Surface
Burner Heads
+ The surface burner heads are removable.
The cap portion of the head is porcelain
and the port area is aluminum. Wash
the burner heads in the sink with mild
detergent and a plastic scrubber.
BURNER HEAD
+ Check to be sure all ports are open. To
open clogged ports, insert a straight pin
directly into each port. Do not enlarge or
distort the port.
+ When replacing the burner heads, carefully
align the tab on the burner base with the
indentation in the head. The two pins will
fit in the slots when the tab is aligned with
the indentation.
NOTE: When burner heads are removed for
cleaning, do not spill liquids through the holes in
the burner base.
BURNERBASE
* Brand names are trademarks of the respective manufacturers.