Jenn-Air JGW9130 Oven User Manual


 
Before You Call for Service
Moisture condensation on oven window.
0 This is normal when cooking food high in moisture.
Excessive moisture was used when cleaning the window.
Strong odor or light smoke when oven is turned on.
This is normal for anew wall oven and will disappear after
a few uses. Initiating a clean cycle will "burn oft_' the
smells more quickly. Turning on a ventilation fan will help
remove the smoke and/or odor.
# Excessive food soils on the oven bottom. Use a self-clean
cycle.
A fan sound can be heard.
This is normal. A fan automatically turns on when the
oven is operated to cool the clock controls. It may continue
after the oven is turned off.
"F" plus a number appears in display.
This is called a fault code. If a fault code appears in the
display and beeps sound, press theStop/Clear pad. If the
fault code and beeps continue, disconnect power to the
wall oven. Wait a few minutes, then reconnect power to
the oven. If the fault code and beeps still continue, discon-
nect power tothe appliance and call an authorized servicer. _
If the oven is heavily soiled, excessive flare-ups may
result in a fault code during a clean cycle. Press Stop/
Clear pad and allow the oven to cool for one hour, then
reset the clean cycle. If the fault code and beeps still
continue, disconnect power to the appliance and call an :':
authorized servicer.
i