Filter
Top Products
5 Controls at a Glance
Convect Bake
Use for convection baking.
1. Press Convect Bake pad.
2. Press the Auto Set (0) pad for 325° F or appropriate num-
ber pads for desired temperature.
See page 8 for additional information.
Drying
Use to dehydrate foods such as fruits, vegetables and herbs.
1. Press Drying pad.
2. Press the Auto Set (0) pad for 140° F or appropriate num-
ber pads for desired temperature.
See page 15-16 for additional information.
Probe
Use to set desired internal temperature of a food when using
the Probe accessory.
1. Insert probe into food and oven receptacle.
2. Press Probe pad. Press the appropriate number pads to set
the desired internal temperature of the food.
3. Press Bake or Convect Roast pad. Press the appropriate
number pads for desired bake or roast temperature.
See page 11 for additional information.
Cook Time/Stop Time
Use to program the oven to start and stop automatically.
1. Press Bake, Convect Bake, or Convect Roast pad. Press
the appropriate number pads for desired temperature.
2. Press Cook Time pad. Press the appropriate number pads
to enter cooking time in hours and minutes.
3. To delay the start of cooking, press Stop Time pad. Press
the appropriate number pads to enter the time you want the
oven to stop.
See page 13-14 for additional information.
Setting the Clock
1. Press Clock pad.
♦
The indicator word TIME will flash in the display.
2. Press the appropriate number pads until the correct time of
day appears in the display.
When electrical power is supplied or after a power interrup-
tion, the last clock time, before power was interrupted, will
flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for clock controlled oven operations or self-
clean.
Setting the Timer One/Two
Use to set and then signal the completion of a time period up
to 11 hours and 55 minutes (11:55).
The timers can be used independently of any other oven
activity and can be set while another oven function is operat-
ing. The timers do not control the oven.
1. Press a Timer pad.
♦ The indicator word TIMER will flash along with # 1 or
#2 plus “0HR:00” appears in the display.
2. Press the appropriate number pads until the desired num-
ber of minutes or hours and minutes appear in the display.
Example: To set Timer One for 5 minutes, press the
Timer One pad and the number 5 pad. After five seconds,
the display will show:
Example: To set Timer Two for 1 hour and 30 minutes,
press the Timer Two pad and the numbers 1,3,0 pads.
After five seconds the display will show:
NOTE: If both timers are set, the timer with the least
amount of time remaining will have display prece-
dence.
♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦