Filter
Top Products
5
Product Dimensions
Cabinet Dimensions
Countertop Cutout Dimensions
IMPORTANT: Countertops with a bullnosed front edge are not
recommended for these installations.
■ Some models require a countertop deeper than 25"
(63.5 cm); see the following Countertop Cutout Dimensions
section.
■ To avoid mistakes, it is recommended that the cooktop and
vent cutouts be drawn on the countertop before making any
cutouts.
■ See Cooktop Installation Instructions for complete cutout
dimensions, location dimensions and installation details.
Countertop Cutout Dimensions
Interior-mounted blower motor model
NOTES:
■ See cooktop manufacturer’s instructions for cooktop cutout
depth and width.
■ Use dimensions for vent system cutout location that applies
to your installation.
■ Interior mounted blower systems connect with 6" (15.2 cm)
round vent. The cutout locations for this vent system will
depend on your specific installation.
Top trim widths:
30¹⁄₄" (76.8 cm) for 30" (76.2 cm) vent
36¹⁄₄" (92.1 cm) for 36" (91.4 cm) vent
13¹⁄₂" (34.3 cm)
retractable
vent height
27" (68.6 cm) for 30" (76.2 cm) vent
33" (83.8 cm) for 36" (91.4 cm) vent
13" (33.0 cm)
9¹⁄₄"
(23.5 cm)
³⁄₄"
(1.9 cm)
2¹⁄₈" (5.4 cm)
28³⁄₄"
(73.0 cm)
³⁄₈" (0.95 cm)
1¹⁄₂" (3.8 cm)
13" (33.0 cm)
Interior-mounted blower motor model
Terminal box cover
6" diameter
vent collar
A= ¹⁄₂" (12.7 mm)
minimum
21⁵⁄₁₆"
(54.1 cm)
All cutouts are
for 6" (15.2 cm)
diameter vent
system.
Centerline of cooktop cutout
23³⁄₄"
(60.3 cm)
21⁵⁄₁₆"
(54.1 cm)
Locate power
supply junction
box at lower
left hand
rear corner
of the cabinet.
7⁵⁄₈" (19.4 cm)
A. Downdraft vent
B. Cooktop
C. Measurement of cooktop rear
overhang.
D. D = Measurement of cooktop
rear overhang (C) + 1
¹³⁄₁₆
"
[46.2 mm] (E)
E. 1
¹³⁄₁₆
" (46.2 mm)
F. ½" (12.7 mm)
minimum
G. ¼" (6.4 mm)
minimum
H. Countertop and
backsplash
I. ½" (12.7 mm)
minimum
A. ½" (12.7 mm) minimum
to backsplash or rear
wall
B.
³⁄₄
" (19.1 mm) maximum
backsplash depth
C. 27
¹⁄₂
" (69.9 cm) on 30" (76.2 cm) models
33
¹⁄₂
" (85.9 cm) on 36" (91.4 cm) models
D. D = Measurement of cooktop rear
overhang + 1
¹³⁄₁₆
" (46.2 mm)
A
B
C
E
H
D
I
G
F
A
B
C
D