Filter
Top Products
Installation
• The set-up of the electrical installation is
arranged so that the appliance can be
isolated from the mains with a minimum 3
mm all-pole contact separation.
Suitable isolation devices include, for
example, circuit breakers, fuses (screw
type fuses are to be removed from the
holder), RCDs and contactors.
• Anti-shock protection must be provided by
the installation.
• The built-in unit must meet the stability
requirements of DIN 68930.
• Built-in cookers and cooking surfaces are
equipped with special attachment systems.
For safety reasons, they must only be
combined with appliances from the same
manufacturer.
The use of heat protection strips is prohibited
for cookers and ovens with Pyrolytic
Cleaning, if the recess has a rear wall and
closed ground-level compartment.
However installation is possible with a
ground-level compartment that has been
shortened by at least 20 mm and which has
base ventilation of the same cross-section.
720 mm
560 mm
320 mm
320 mm
40 mm
551 mm
364 mm
90°
90°
34