Filter
Top Products
19
!
Replacing the Oven LightReplacing the Oven Light
Replacing the Oven LightReplacing the Oven Light
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the
following specifications:
- Electric power: 15 W/25 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Repair agent.
To replace the faulty bulb:
1.
Ensure the oven is disconnected from the electricalEnsure the oven is disconnected from the electrical
Ensure the oven is disconnected from the electricalEnsure the oven is disconnected from the electrical
Ensure the oven is disconnected from the electrical
supplsuppl
supplsuppl
suppl
yy
yy
y
..
..
.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
OvOv
OvOv
Ov
en Caen Ca
en Caen Ca
en Ca
vityvity
vityvity
vity
The enamelled base of the oven cavity is best cleaned whilst
the oven is still warm.
Wipe the oven over with a soft cloth soaked in warm soapy
water after each use. From time to time it will be necessary
to do a more thorough cleaning, using a proprietary oven
cleaner.
Oven Shelves and Shelf SupportsOven Shelves and Shelf Supports
Oven Shelves and Shelf SupportsOven Shelves and Shelf Supports
Oven Shelves and Shelf Supports
To clean the oven shelves, soak in warm soapy water and
remove stubborn marks with a well wetted soap impregnated
pad. Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning.
Proceed as follows:
1) remove the front screw while keeping the shelf support
in position with the other hand (see diagram 4);
2) disengage the rear hook and take off the shelf support
(see diagram 5);
3) once the cleaning is carried out, refit the shelf supports
following the procedure in reverse.
Please, ensure the retaining nuts are secure when refitting
the shelf support.
44
44
4
55
55
5
!