Filter
Top Products
54
Installation instructions
1
Attention:
The appliance must be in-
stalled according to the instructions.
The installation must be undertaken by
a qualified engineer according to the
relevant British Standards.
Any damage resulting from improper
repairs is not covered by the warranty.
1
Safety information for
the installer
•
The electrical installation is to be set up so
that the appliance can be isolated from the
mains with a minimum 3mm all-pole contact
separation.
Suitable separation devices include e.g. cut-
outs, fuses (screw fuses are to be taken out
of the holder), RCD’s and contactors.
•
Anti-shock protection must be provided by
the installation.
•
The built-in unit must meet the stability re-
quirements of DIN 68930.
•
Built-in ovens and built-in cooking surfaces
are fitted with special connection systems.
For safety reasons, they must only be com-
bined with appliances from the same manu-
facturer.
The use of thermal insulation bars is not per-
mitted in cookers and ovens with Pyroluxe, if
the recess has a back wall and a solid bottom
to the compartment.
However if the bottom is shortened by at
least 20 mm and there is ventilation in the
plinth of the same diameter, it is possible to
build them in.