Filter
Top Products
2. Then wait 5 seconds: the “Clock” pilot
lamp will go out and the display will show
the set time. The appliance is now ready
for use.
To reset the correct clock time:
1. Press the button
repeatedly to select
the “Clock” function. The relevant pilot
lamp will start flashing. Then proceed as
described above.
The clock time can only be reset if no
automatic function (cooking time
or
end of cooking time
) has been set.
Cooking Duration
function
This function allows the oven to automatically
switch off at the end of a programmed cooking
duration time. Place food in the oven, select a
cooking function and adjust the cooking
temperature. Press button
repeatedly to
select the “Cooking Duration” function. The
relevant pilot lamp
will start flashing. Then,
proceed as follows:
To set the duration time
1. Press button " + " or " - ".
2. After the setting is carried out, wait for 5
seconds: the "Cooking Duration" pilot
lamp
will come on and the display will
revert to the time of day.
3. When cooking time is over, the oven will
be switched off automatically and an
acoustic alarm will be heard, while the
pilot lamp will start flashing. Turn the oven
function and the thermostat control knob
to zero.
To switch off the acoustic alarm, press any
button.
Turning the acoustic alarm off will reset the
oven to manual, and if the oven function and
the thermostat knobs are not set to zero the
oven will start to heat again.
To cancel the duration time
1. Press button
repeatedly to select the
“Cooking Duration” function. The
relevant pilot lamp
will flash and the
display will show the remaining cooking
time.
2.
Press button " - " until the display shows
“0:00”. After 5 seconds the pilot lamp will
go out and the display will revert to the
time of day.
9