Filter
Top Products
Malfunction Possible cause and solution
The programme does not start
• The dishwasher door has not been properly closed.
Close the door.
• The main plug is not plugged in.
Insert the main plug.
• The fuse has blown out in the household fuse box.
Replace the fuse.
• Delay start has been set.
If dishes are to be washed immediately, cancel the delay
start.
Once these checks have been carried out
switch on the appliance.
The programme will continue from the point
at which it was interrupted.
If the malfunction/fault code reappears or if
other fault codes not described in the charts
appear, please contact our extended
warranty administrators, refer to section
''Repairs - After Sales Service''.
26